Post by hv1 on Jun 3, 2018 14:26:50 GMT
I have installed a Nexus 2013 in my Opel Astra and dit the no battery mod (very usefull, thanks!).
Because the tablet is now fitted deep in my dashboard I can't reach the power-switch anymore, unless I open my dashboard (which I now can do with my eyes closed).
To make life easier I decided to make an external powerswitch. This is how I did it:
Open the tablet:.
You'll see the powerswitch is covered with a silicone layer:
Peel off this silicone layer and remove the thin aluminium layer:
Solder wires to the copper centre and the copper-surrounding:
After this you can close and install the tablet and connect a push-button at a reachable place in your car (I put mine in the glovebox)
