|
Post by Admin on Jan 24, 2016 18:40:36 GMT
ElementalX kernel will work with Marshmallow and has the following featureselementalx.org/devices/nexus-7-2013/FEATURES Stock/AOSP and CyanogenMod/CAF versions easy installation and configuration with Aroma installer optional wake gestures support optional sweep2wake optional doubletap2wake option to disable magnetic on/off overclocking/underclocking options l2 and bus bandwidth overclocking options GPU overclocking options choose automatic minimum voltage (725mV to 850mV) full user voltage control ElementalX CPU governor kernel-based thermal control init.d support USB fastcharge NTFS r/w and exFAT support RGB color control optional USB OTG + charge mode MultiROM support
|
|
|
Post by Admin on Jan 24, 2016 18:42:44 GMT
Video here of an N7 carputer using ElementalX Kernel and marshmallow www.youtube.com/watch?v=tqEa3T0jcPc Core software used on this tablet:Android 6.0.1 base CyanogenMod 13.0 Nightly ElementalX 5.05 Kernel, EX Kernel Manager I have installed this on my spare N7 2013 and so far it works perfectly, I am using ElementalX Kernel 5.07 CM13 nightly for Nexus 7 2013 wifi only download.cyanogenmod.org/?device=floCM13 nightly for Nexus 7 2013 4G download.cyanogenmod.org/?device=debI would definitely recommend using the No Battery Mod with this set up
|
|
|
Post by Admin on Jan 25, 2016 8:54:09 GMT
I am going to do a test on battery life with ElementalX Kernel over the next few days, I will post the results here when I have them
|
|
|
Post by tagcart on Jun 26, 2016 22:32:36 GMT
Hey there, doing a build and trying to decide what kernel to roll with. Any update on this? Did you end up liking the ElementalX?
|
|
|
Post by Admin on Jun 27, 2016 7:46:59 GMT
Hey there, doing a build and trying to decide what kernel to roll with. Any update on this? Did you end up liking the ElementalX? Timur's kernel is definitely better, Elemental x is ok, but is just not streamlined enough or has the FI mode (fixed install) .. my advice .. Timure's kernel,
|
|
|
Post by valk791 on Jul 1, 2016 8:18:38 GMT
Hi guys I new in the forum. I have a nexus 7 2013 stock 5.1.1 with elementalx connected to the zooper dac for the audio. The tablet and the dac are powered through ignition 12 volt. When the power goes off the tablet goes in suspend mode and the dac turns off then when the power goes on the tablet wakes on and the dac turn on. My problem is that the dac doesn't work when the power goes on, to make it work I have to reboot the tablet. For now I turn off the tablet when the power goes off and turn on the the powers turn on, the dac work but waiting the boot is quite annoying. Is there something I can do for the "hotplugging" of the dac? Thanks in advance.
|
|