|
Post by Admin on May 31, 2016 12:51:41 GMT
I shutdown the tablet completly before doing the mod... the cable i used is a usb a-b (cable for printer) ... is the charging module seem ok on the picture ? I tried the tablet on the car and in the house with the asus charger and it do the same problem. I tried to factory reset the tablet and it keep doing it. I think your problem may be the printer cable, I seem to recall somebody else whi used a printer cable and ran into problems, and a reset is different to a reinstall
|
|
evils
New Member
Posts: 19
|
Post by evils on May 31, 2016 16:41:18 GMT
Any specs on cable i should be using ? I used the printer cable coz the cable seem better quality and bigger
|
|
evils
New Member
Posts: 19
|
Post by evils on May 31, 2016 16:41:41 GMT
I'm on 5.1.1 v3 timur should i tried to update to 6.0.1 with timur ?
|
|
|
Post by Admin on May 31, 2016 16:50:27 GMT
I'm on 5.1.1 v3 timur should i tried to update to 6.0.1 with timur ? I have 6.01 and Timur's new kernel and I think it is much better than 5.1.1, seems smoother, quicker and more reliable The cable I used for my mod was the USB data cable that came with the phone, I just didnt use the green and white (I think those were the clours).. just used the black and red
|
|
evils
New Member
Posts: 19
|
Post by evils on May 31, 2016 20:24:29 GMT
Will try it with 6.0.1 and timur if it dont work i will try with my cable that came with the tablet.
|
|
evils
New Member
Posts: 19
|
Post by evils on Jun 1, 2016 12:40:12 GMT
If you look on my picture someone remark that i soldered the black to the 2 black cable ... does it matter ?
|
|
|
Post by luciano on Jun 1, 2016 15:13:19 GMT
If you look on my picture someone remark that i soldered the black to the 2 black cable ... does it matter ? If you look at the pictures that i've posted a page back you will get your answer for the first question. The rebooting problem is because: 1. the cable is to thin = check your cable AWG or 2. the psu is not providing enough power
|
|
evils
New Member
Posts: 19
|
Post by evils on Jun 1, 2016 15:39:51 GMT
luciano its write 28 awg on the cable you mean 22 awg minimum for the red and the black or 22 awg for the whole cable ?
The psu that i use is dell 5v 2a i tried with several psu and nothing work #1
On your picture you have black cable soldered on both ground does it matter ?
|
|
evils
New Member
Posts: 19
|
Post by evils on Jun 1, 2016 17:19:19 GMT
Problem solve i change the cable for a micro usb for tablet and it work #1 finally ! Awsome mod... it take 30 mAh when on sleep thats really good.
|
|
|
Post by Admin on Jun 1, 2016 17:42:18 GMT
Problem solve i change the cable for a micro usb for tablet and it work #1 finally ! Awsome mod... it take 30 mAh when on sleep thats really good. Great, I knew I had seen the exact problem you had with the printer cable before .. great it is now working well
|
|
evils
New Member
Posts: 19
|
Post by evils on Jun 1, 2016 18:06:06 GMT
Yeah i will update to 6.0.1 probably after the job cant wait to reinstall everything and try the new version. Hope the bluetooth work better than the last version lol
|
|
|
Post by Admin on Jun 1, 2016 18:16:12 GMT
Yeah i will update to 6.0.1 probably after the job cant wait to reinstall everything and try the new version. Hope the bluetooth work better than the last version lol I cant really tell how the bT works because I use mine on wifi now, wifi tethered to my phone, now there is no problem with battery drain wifi seems better than BT for data, and I use tablet talk over wifi too
|
|
evils
New Member
Posts: 19
|
Post by evils on Jun 1, 2016 18:21:57 GMT
I use bluetooth for obd2 bluetooth dongle and bluetooth to link with car audio. It was a little slow to connect sometime.
|
|
|
Post by Admin on Jun 1, 2016 18:46:56 GMT
I use bluetooth for obd2 bluetooth dongle and bluetooth to link with car audio. It was a little slow to connect sometime. Ok, can you not use a USB DAC and plug that into the AUX of the head unit ?.. the sound quality should be better and of course instant sound (no connection issue's)
|
|
evils
New Member
Posts: 19
|
Post by evils on Jun 1, 2016 18:50:36 GMT
The sound quality is not so bad with poweramp.
|
|